Yamaha RX-V470 - Manual (Page 16)

16
÷ To rapidly change the frequency, press and hold the
button.
Note
If you tune in an FM station manually, it is received in
monaural mode automatically to obtain the sound quality.
If the received station is not the desired one, press
UP or DOWN again.
÷ If the tuning search does not stop at the desired
station (because the signals of the station are weak),
change to the MANUAL TUNING method.
1/ 1
AUTOMATIC TUNING
1
Press the TUNER button and select the reception
band (FM or AM) by pressing the FM/AM button.
The selected band appears on the display.
MANUAL TUNING
1
Press the TUNER button and select the reception
band (FM or AM) by pressing the FM/AM button.
The selected band appears on the display.
Display information
STEREO
MHz FM 0 20 40 50 100
1 2 3 1 Displays the band and frequency of the received
station.
2 Lights when an FM stereo broadcast with sufficient
signal strength is received (in automatic tuning mode
only).
3 Indicates the signal level of the received station.
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
A U T O T U N I N G
MHz FM
FM/AM
2
Press the TUNING MODE button so that the AUTO
indicator lights on the display.
TUNING MODE
AUTO/MAN'L MONO
\
Lights.
3
Tune in a desired station with the TUNING button.
To tune in a higher frequency, press the right side
(UP) once.
To tune to a lower frequency, press the left side
(DOWN) once.
DOWN TUNING UP
FM/AM
TUNING MODE
AUTO/MAN'L MONO
3
Tune to the desired station manually with the
TUNING button.
To tune in a higher frequency, press the right side
(UP) sequentially.
To tune in a lower frequency, press the left side
(DOWN) sequentially.
DOWN TUNING UP
3/ 3 2/ 2
TUNER
TUNING OPERATIONS
2
Press the TUNING MODE button so that the AUTO
TUNING indicator goes out.