Yamaha RX-V470 - Manual (Page 14)

14
COPY 3
1 2
To monitor the audio and/or video signals being
recorded
Press the MONITOR button for the audio or video tape
recorder being used.
1
Select the source to be recorded.
MONITOR
VCR TAPE LD TUNER CD PHONO
÷ To dub from tape to tape, you should record from the
component connected to the VCR jacks to the
component connected to the TAPE jacks.
÷ When selecting LD, TUNER, CD or PHONO, make
sure that the TAPE MONITOR and VCR MONITOR
input selectors are not selected.
2
Play the source and then turn the VOLUME control
up to confirm the input source.
÷ The VOLUME, BALANCE, BASS, TREBLE and DSP
(Digital Sound field Processor) control settings have
no effect on the recording.
3
Set the tape deck or VCR to the recording mode.
MONITOR
VCR TAPE
RECORDING A SOURCE