Yamaha RX-V461 - Manual (Page 61)

57
En
SET MENU
English
AD
V
ANCED
OPERA
T
ION
■ Multi channel input setup
E)MULTI CH SET
Background Video BGV
Use this feature to select the video source played in the
background of the sources input at the MULTI CH INPUT
jacks.
Choices:DVD, DTV/CBL, V-AUX, DVR, LAST
y
Select “LAST” to set this unit to automatically select the last
selected video source as the background video source.
Use this menu to adjust the optional system parameters.
■ Display settings
A)DISPLAY SET
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: –4 to 0
Control step: 1
• Press Dl to make the front panel display dimmer.
• Press Dh to make the front panel display brighter.
Front panel display scroll FL SCROLL
Use this feature to set whether to display the information
(such as a song title or a channel name) in the front panel
display in a continuous manner or by the first 14
alphanumeric characters after scrolling all characters once
when “XM” or “DOCK” is selected as the input source.
Choices: CONT, ONCE
• Select “CONT” to display the operation status in the
front panel display in a continuous manner.
• Select “ONCE” to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
OSD shift OSD SHIFT
Use this feature to adjust the vertical position of the OSD.
Control range: –5 (upward) to +5 (downward)
Control step: 1
Initial setting: 0
• Press Dl to raise the position of the OSD.
• Press Dh to lower the position of the OSD.
Source feature OSD display time
OSD-SOURCE
Use this feature to set the amount of time to display the
XM Satellite Radio information or iPod menu in the OSD
after you perform a certain operation.
Choices: ON, 10s, 30s
• Select “ON” to display the OSD unceasingly during an
operation.
• Select “10s” to turn off the OSD 10 seconds after you
perform a certain operation.
• Select “30s” to turn off the OSD 30 seconds after you
perform a certain operation.
Amplifier function OSD display time
OSD-AMP
Use this feature to set the amount of time to display the
status and sound field parameters information screen after
you perform a certain operation.
Choices: ON, 10s, 30s
• Select “ON” to display the OSD constantly during an
operation.
• Select “10s” to turn off the OSD 10 seconds after you
perform a certain operation.
Select “30s” to turn off the OSD 30 seconds after you
perform a certain operation.
3 OPTION MENU
E)MULTI CH SET
BGV ;;;;;;;;;LAST
[ ]/[ ]:Select p [
2 INPUT MENU
;MANUAL SETUP
3 OPTION MENU
E)XM RADIO SET p
p
. A)DISPLAY SET
B)MEMORY GUARD
C)AUDIO SELECT
D)PARAM. INI
[ ]/[ ]:Up/Down
[ENTER]:Enter
A)DISPLAY SET
. DIMMER;;;;;;;;;0
FL SCROLL ;;;CONT
OSD SHIFT ;;;;;;0
OSD-SOURCE ;;;30s
OSD-AMP ;;;;;;30s
[ ]/[ ]:Up/Down
p
p
p [
[ ]/[ ]:Select
3 OPTION MENU