What do you want to do with this unit – Yamaha RX-V461 User Manual
Page 13
Quick start guide
9
En
English
INTR
ODUCTION
Case C: “I want to listen to a music program from
the FM radio station...”
Press F
SCENE 4 (or
F
SCENE 4) to select “Radio
Listening”.
• To use the “Radio Listening” template (Case C), you must
tune into the desired radio station in advance. See pages 38
to 40 for tuning information.
• To achieve the best possible reception, orient the
connected AM loop antenna, or adjust the position of the
end of the indoor FM antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 26 for details.
■ After using this unit...
Press 1
STANDBY/ON on the front panel to set
this unit to the standby mode.
This unit is set to the standby mode. In the standby mode,
this unit consumes a small amount of power in order to
receive infrared signals from the remote control. To turn
on this unit from the standby mode, press 1STANDBY/
ON (or
GSTANDBY). See page 19 for details.
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
Notes
Note
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
• Creating your original SCENE templates
■ Using various input sources
• Basic controls of this unit
• Enjoying FM/AM radio programs
• Enjoying XM Satellite Radio programs
• Using your iPod with this unit.
■ Using various sound features
• Using various sound field programs
• Using the pure direct mode for the high
fidelity sound
• Customizing the sound field programs
■ Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room (AUTO
SETUP)
• Manually adjusting various parameters of
this unit
• Setting the remote control
• Adjusting the advanced parameters
■ Additional features
Automatically turning off this unit