Yamaha RX-V461 - Manual (Page 54)

50
En
SET MENU
Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
The “XM RADIO SET” parameter is only applicable to the U.S.A. and Canada models.
■ Signal information
SIGNAL INFO
Use this feature to check audio signal information (see page 33).
Use the remote control to access and adjust each
parameter.
y
You can change the “SET MENU” parameters while this unit is
reproducing sound.
1
Set the operation mode selector to
AMP and
then press N
SET MENU to enter “SET
MENU”.
The top “SET MENU” display appears in the OSD.
2
Press Dk / n to select “MANUAL SETUP”.
3
Press D
ENTER to enter “MANUAL SETUP”.
The “MANUAL SETUP” display appears in the
OSD.
4
Press Dk / n / l / h and D
ENTER to select
and change the parameter.
• Press k / n to select the desired menu or parameter.
• Press l / h to change the parameter value.
• Press DENTER to enter the selected menu or to
confirm the parameter.
• Press ERETURN to return to the previous menu
level.
5
Press N
SET MENU to exit from “SET
MENU”.
Parameter Features Page
A)DISPLAY SET
Adjusts the brightness of the front panel display and the way in which the XM and iPod
information is displayed.
57
B)MEMORY GUARD Locks sound field program parameters and other “SET MENU” settings. 58
C)AUDIO SELECT
Designates the default audio input jack select setting for the input sources connected to the
DIGITAL INPUT jacks when you turn on the power of this unit.
58
D)PARAM. INI Initializes the parameters of a group of sound field programs. 58
E)XM RADIO SET Displays the current reception level of the XM Satellite Radio signals. 58
Note
Using SET MENU
SET MENU
TOP A MENU
. ;AUTO SETUP
.A;MANUAL SETUP
;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p
SET MENU
TOP A MENU
;AUTO SETUP
.A;MANUAL SETUP
;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
p
p
;MANUAL SETUP
. 1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
[ ]/[ ]:Up/Down
p
p
[ENTER]:Enter