Xantrex Technology IP1012 AL - Manual (Page 38)

Specifications
A–2 975-0337-01-01
Physical Specifications
Physical specifications
Enclosure Sealed; dust and water-resistant; ignition
protected
Dimensions Approximately. 8.5" (21.8 cm) H x 7”
(17.7 cm) W x 13.0"(33.0 cm) D, excluding DC
ground connector (similar to Group 31 battery
dimensions)
Net weight 40 lbs. (18 kg) maximum without mounting
brackets or external cables
External finish Base - Clear anodized aluminum.
Top cover - black anodized or black powder
coated aluminum
Mounting Orientation All allowed
Mounting method Four M8x1.25 threaded holes accessible from
bottom only, one in each corner, and/or battery
hold-down bar over center top of cover.
Recommended torque: 5-6 ft-lb (7-8 Nm)
Battery cable #2 AWG Minimum, maximum 10 feet long,
each way
Battery size 12 volt 225 Ah minimum to prevent overstress of
battery in charge mode; 400 Ah recommended
IP1012_AL.book Page 2 Tuesday, May 1, 2007 12:18 PM