Xantrex Technology IP1012 AL - Manual (Page 36)

Troubleshooting
4–4 975-0337-01-01
Table 4-2 explains the blinking pattern of the Charger indicator when the
unit is in charge mode.
Table 4-3 explains the Inverter indicator flashing pattern when the unit is
in invert mode.
Table 4-2 Charger indicator blink patterns
Condition Blink Level
High Battery voltage 1
Inverter too hot 2
Charge cycle not complete after 20 hours 3
Table 4-3 Inverter indicator blink patterns
Condition Blink Level
High Battery voltage 1
Inverter too hot 1
Low Battery 2
Over current 2
Auto shutdown inverter 3
IP1012_AL.book Page 4 Tuesday, May 1, 2007 12:18 PM