Xerox 701P46985 - Manual (Page 11)

FREEFLOW PRINT SERVER 6.0.xx
XEROX FREEFLOW PRINT SERVER 5
GETTING READY FOR THE PRINT SERVER INSTALLATION
W-1: Solaris operating system worksheet
The Xerox service representative uses the following information
during the installation of the Solaris operating system on the
print server.
In the Customer Value column, fill in or circle the appropriate
value where applicable. Bold text indicates a standard
installation value.
Item # Data Element Customer Value
1 Primary Network Interface bge0 or bge1 or ce1
2 DHCP Yes No
3 Hostname
4 IP Address (If DHCP is yes, then skip)
Subnets? Yes No
5
If Yes, then enter Subnet Mask
6 Enable IPv6? No
Set the Default Route
Detect One
Specify One
None
7
Default Router IP Address
(Default gateway)
(If Specify One, enter the Router IP
Address)
8 Enable Kerberos Security? Yes No
9 Name Service NIS+ NIS DNS LDAP None
Domain Name
NIS+,
NIS S
Locate server automatically Find one Specify
If Specify, then NIS Server Hostname
If Specify, then NIS Server IP Address
Domain Name
DNS DNS Server IP Address(es)
(Enter up to 3 addresses)
DNS Search List
(Enter from 1 to 6)