Zenoah SGCZ2610DL - Manual (Page 2)

GB-2
SGCZ2610DL/SGCZ2610DW
DESIGNATION : RECIPROCATORS
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
MODELS : SGCZ2610DL/SGCZ2610DW
SERIAL NUMBERS DATING : 2010 and onwards
(The year is clearly stated on the rating plate,
followed by the serial number)
This declaration conform with :
DIRECTIVE 2006/42/EC
(The following standards have been applied: ISO 12100-1,-2, FprEN 15503: 2009)
DIRECTIVE 2004/108/EC
(The following standards have been applied: EN 61000-6-1, EN 55012 (CISPR 12: 2005))
DIRECTIVE 2000/14/EC
conformity assessment procedure followed ANNEX V
(The following standards have been applied: ISO 11094)
DIRECTIVE 2002/88/EC
ENISO 11806
Date : 29 December 2009
Signature :
Kiyoshi Honda
General Manager, Development Center
Authorised representative :
Husqvarna AB
SE-561 82 Huskvarna, Sweden
Person authorised to compile the technical file :
Bo R Jonsson
SE-561 82 Huskvarna, Sweden
EC DECLARATION OF CONFORMITY
(Applies to Europe only)
The undersigned manufacturer,
Husqvarna Zenoah Co.,Ltd.,
1-9, Minamidai, Kawagoe, Saitama, Japan,
declares under sole responsibility that the following products referred to in this
declaration conform with the requirement of the following COUNCIL’S DIRECTIVE.
The products referred to are :
EXPLANATION OF SYMBOLS AND SAFETY WARNINGS
WARNING!!!
RISK OF DAMAGING HEARING
Wear head, eye and ear protection.
APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION
DIRECTIVE 97/68/EC AMENDED 2002/88/EC
e13 *97/68SH2G3*2002/88*0404*00
* Specifications are subject to change without notice
1) Noise emissions in the environment measured as sound power (L
WA ) in conformity with EC directive 2000/14/EC.
Reported soundpower level for the machine has been measured with the original cutting attachment that gives the high-
est level.
The difference between guaranteed and measured sound power is that the guaranteed sound power also includes
dispersion in the measurement result and the variations between different machines of the same model according to
Directive 2000/14/EC.
Reported data for equivalent sound pressure level (L
pAeq ) at the operator’s ear for the machine has a typical statistical
dispersion (standard deviation) of 1 dB (A).
2) Reported data for equivalent vibration level (a
hv,eq
) at the control handle has a typical statistical dispersion (standard devia-
tion) of 1 m/s 2 .
MODEL SOUND LEVEL 1) VIBRATION LEVEL 2)
ISO 22868
LpAeq
ISO 22868
LwA
guaranteed
ISO 22867
ahv.eq
SGCZ2610DL 25.4 cm 3 86 dB(A) 106 dB(A) 4.7 m/s 2
SGCZ2610DW 25.4 cm 3 86 dB(A) 106 dB(A) 4.2 m/s 2