Yamaha GX-90VCD - Manual (Page 47)

E-37
English
Recording disc(s) on both sides
of a tape automatically
* A Video-CD cannot be recorded by this method.
1
Press the CD input selector button and load the disc to be
recorded.
2
Select the disc by pressing the DISC SKIP button.
3
Load a tape into the deck 2 cassette compartment.
4
When recording with the Dolby NR system, press the
DOLBY NR button so that “
B” lights up on the display.
If not, turn it off.
*
For details, refer to the “Dolby B Type Noise
Reduction” on page 31.
5
If the reverse mode “ ” is not selected, press the
reverse MODE selector button to select it.
6
Press the EDIT button. (“EDIT” appears on the display.)
disc playback and recording starts. Recording is carried
out on side A and B of the tape continuously.
*
If the tape has not rewound to the end, it is rewound to
the end rapidly before recording starts.
Recording starts from the first part of the tape on which
recording can be done.
* “A ” (or “ B”) on the display shows the side of
the tape on which recording is being carried out.
* When the recording on side A finishes while a track is
being played back, the sound is automatically faded
out, and then the recording stops.
The recording on side B starts from the beginning of
the same track.
Notes
• When this Video-CD player is in the all disc play mode, if
the tape’s total possible recording time is longer than the
total playing time of the selected disc, tracks on another
disc are recorded continuously.
In this case, as many as three discs can be recorded
automatically.
•
During recording, the DISC CHANGE button on the Video-
CD player is disabled.
•
The Video-CD player’s repeat play mode will be canceled
during this recording mode.
Recording programmed tracks
Programmed tracks from one or more discs can also be
recorded in the same way.
1 1
Program desired tracks from one or more discs. (Refer to
page 21 for the programming procedure.)
2 2
Follow steps 3–6 described above.
To cancel this function
Before recording, press the stop button of the Video-CD
player or the tape deck.
To stop recording
Press the stop button of the tape deck.
(At this time, disc playback automatically stops.)
RECORDING CD/VIDEO-CD SOURCES
1 PLAYBACK 2 REC /PLAYBACK
EJECT
OPEN/CLOSE
DISC CHANGE MINI COMPONENT SYSTEM
GX–90VCD
1
2
3 DISC
PROGRAM
USER
VOLUME
MEMORY
REC/PAUSE MODE
HOUR MIN
NORMAL
DUBBING HIGH
MEMORY
TIME ADJ
DOLBY NR
AUTO/MAN’L
TIMER
TIMER REC
MUSIC
POWER PHONES
A/B/C/D/E
RANDOM
REPEAT
EDIT
DISPLAY
CD
INPUT INPUT
TAPE 1/2
EJECT
Active Servo Technology MIC MIXING
PRESET/TUNING/BAND
VIDEO CD
Version 2.0 / Playback Control
ECHO ECHO
4 5 3
1 6 1
1
1
2
2
3
3
4
4
5
5
TIME
A
DISC SKIP
PROG
B
TAPE
C
EDIT
D
+ I0
E
OPEN/CLOSE INDEX MODE
6
6
7
7
8
8
9 0
CD
PRESET
TUNER
TAPE
RETURN
STOP PLAY PLAY REC/PAUSE TAPE 1/2
MUSIC
TEST FLAT CENTER/REAR
/DELAY
PROGRAM USER
POWER
INPUT SLEEP
VOLUME
REPEAT
PREV NEXT SELECT
ECHO/KEY
LEVEL
6
1
1
2