Zenith DTV1080 - Manual (Page 83)

8. CUSTOMIZATION
82
206-3675
8-13. Setting Default Signal Out
Output Channel
Lets you choose the channel used to view your Zenith HD Satellite Receiver, either chan-
nel 3 or, 4. Make sure your TV is set to the selected channel.
To set the channel number of the HD satellite receiver:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down by using “ DE ” on the thumbstick on the remote control.
3. Select the Preference menu by pressing “ ” on the thumbstick.
4. Scroll down to Output Channel by using “ DE ” on the thumbstick.
5. Move the highlight to the right with “ G ” on the thumbstick.
6. Select Channel 3 or 4 and press “ ” to return to the previous level.
7. Press the Exit button on the remote control to return to TV viewing.