Setup and connections – Zenith DTV1080 User Manual

Page 25

3. SETUP AND CONNECTIONS

206-3675

3-4. Connecting to Antennas - Round Dish (Satellite A)

Receiving Signals

1. Connect the “Antenna” to the “ANT IN” jack on the HD Satellite Receiver using a coaxial RF cable.

2. Connect the cable TV signal to the "CABLE IN" jack on the Zenith HD Satellite Receiver using a coaxial

RF cable.

3. Connect the “Jack 1” of the dish antenna to the “SATELLITE IN” jack on the HD Satellite Receiver using

a coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satel

lite dish antenna.)

4. Connect the “Phone Wall Jack” to “PHONE JACK” on the HD Satellite Receiver using a phone cable.

Cable TV
wall jack

LNB
Sat A

Dish

Phone wall jack

DISPLAY
FORMAT

A/V

OUT2

A/V

CALIB/EZ-LINK

OUT1

Antenna

NOTE

While you are subscribing to a DIRECTV



pro-

gramming package, you can still view over-the-

air and cable TV programs, if you make con-

nections to the over-the-air and/or cable jacks.

NOTE

You will not be able to receive DIRECTV HD

programming with a Round dish.