Yamaha DVD-S661 - Manual (Page 29)

25
En
Setup Menu
Eng
lish
1 Press SET UP.
2 Press 2 / 3 to select “AUDIO SETUP
PAGE”.
3 Press ENTER.
Setting the analog output
Set the analog output to match the playback
capability of this unit.
1 In “AUDIO SETUP PAGE”, press 5/a to
highlight [ANALOG OUTPUT], and then
press
3.
STEREO
Select this to change channel output to stereo,
which only delivers sound from the two front
speakers.
LT/RT
Select this if this unit is connected to a Dolby
Pro Logic decoder.
2 Press 5/a to select a setting, and then
press ENTER.
Setting the digital output
The [DIGITAL AUDIO] options are:
[DIGITAL OUTPUT] and [LPCM OUTPUT].
1 In “AUDIO SETUP PAGE”, press 5/a to
highlight [DIGITAL AUDIO], and then
press
3.
2 Press 5/a to highlight an option.
3 Press 3 to open a submenu.
DIGITAL OUTPUT
Set the digital output according to your
optional audio component connections.
OFF
Select this to turn off the digital output.
ALL
Select this if you have connected the digital
audio output jack to a multi-channel decoder/
receiver.
MPEG
➜ PCM
Select this if your receiver is not capable of
decoding MPEG audio signals.
PCM ONLY
Select this only if your receiver is not capable
of decoding multi-channel audio signals.
LPCM OUTPUT
Select this if you have connected this unit to a
PCM-compatible receiver via a digital
terminal, such as the coaxial terminal. In this
case, you may need to adjust [LPCM
OUTPUT].
Discs are recorded at a certain sampling rate.
The higher the sampling rate, the better the
sound quality.
Audio setup menu
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
HDMI AUDIO
NIGHT MODE
LIP SYNC