Xerox Phaser 8860 EN - Manual (Page 2)

Product Safety Data Sheet
Phaser 8860
Page 2 of 2
_______________________________________________________________________________
POWER CONSUMPTION
115 V
Off Mode (W) Power Save (W) Standby (W) Run Mode (W)*
0.3 45.7 103.1 227.1
230 V
Off Mode (W) Power Save (W) Standby (W) Run Mode (W)*
0.9 45.9 104.3 239.1
*Hourly rate extrapolated (color default simplex printing).
HEAT OUTPUT
115 V
Off Mode (BTU/hr) Power Save (BTU/hr) Standby (BTU/hr) Run Mode (BTU/hr)*
1.0 156.0 351.9 775.0
230 V
Off Mode (BTU/hr) Power Save (BTU/hr) Standby (BTU/hr) Run Mode (BTU/hr)*
3.1 156.7 356.0 815.9
*Hourly rate extrapolated (color default simplex printing).
NOTE: The electrical power information provided should not be used to define the electrical support required for this product.
Consult your Xerox representative if you require detailed information.
ENVIRONMENTAL LIMITATIONS
Relative Humidity (%) Ambient Temperature (ºC/ºF)
Operating 10% - 80% 10ºC to 32ºC / 50ºF to 90ºF
LIGHT SOURCE
Not applicable
AUDIBLE NOISE
Declared noise emissions in accordance with ISO 9296:1988(E):
Idling Operating
(Enhanced Mode)
LWAd (1B=10dB) LWAd = 4.4 B (A) LWAd = 7.2 B (A)
Bystander Position (1.0 m) LpAm = 30 dB (A) LpAm = 56 dB (A)
CHEMICAL EMISSIONS
Measured Product Concentration
Ozone 2 ppb (0.004 mg/m³)
Styrene Not detected
Particles (Dust) Not detected
OZONE FILTER REPLACEMENT
Not applicable