Yamaha GX-700 - Manual (Page 36)

E-28
PROGRAM
BASS
BOOST MUSIC
CENTER/
REAR/DELAY TEST
LEVEL
VOLUME POWER SLEEP
/I
REC/PAUSE
DIRECTION TAPE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
TIME PROG R. TIME
C
EDIT
D
PRESET
+ I0
E
MODE REPEAT RANDOM TUNER
DISC SKIP
A B
TUNER CD
INPUT
DISC 1 DISC 2 DISC 3
DOWN UP
VOLUME
STANDBY/ON
DIRECTION
PROGRAM B.BOOST MUSIC INPUT INPUT
MIN
PTY SELECT PRESET/ TUNING/ BAND A/B/C/D/E
DISC CHANGE OPEN / CLOSE
AUTO/MANUAL
TIMER
MEMORY
TIME ADJ
REC/PAUSE DOLBY NR
HOUR
FREQ PS/PTY/RT/CT
RANDOM
MODE– PTY SEEK– START
REPEAT TIME
DISPLAY MODE
Notes
● Adjusting the VOLUME, BASS and TREBLE controls,
B. BOOST and MUSIC buttons have no effect on the
recorded sound. The recording level is automatically
adjusted.
● A sound field program may have effect on the recorded
sound. If a sound field program is selected, cancel it before
you begin recording. Refer to page 37 for how to cancel the
sound field program.
●
If you want to make a recording using Dolby NR, press
DOLBY NR so that “
NR” (
2
) lights up on the display. If
not, turn “ NR” (
2
) off.
* For details, refer to “Dolby B Type Noise Reduction” on
page 25.
Basic recording
1
Turn on the power.
2
Press INPUT or once or more to select the source
you want to record.
3
Load a tape on the tray with side A upward.
4
Press DIRECTION or MODE to change the current setting
if necessary.
5
Press REC/PAUSE.
* “TAPE REC” (
6
) lights up on the display.
6
Begin playing the source to be recorded.
* When playing a CD, the recording automatically begins a
few seconds before the CD play begins. You do not need
to follow step 7.
7
Press of the tape deck .
Displaying the tape counter
During recording, the information of the playing source is
displayed in place of the tape counter (
1
). Press DISPLAY to
change the display to the tape counter. Pressing DISPLAY
again will restore the previous display mode.
Recording
2
7 5
2
5
4
7
3
4
4
1
1
Side A only
Side B only
Side A
→
Side B
Side B only
MODE
DIRECTION