Zoom 4410B/TF - Manual (Page 4)

4
2
In the Privacy Configuration window, click the Authentication
Mode drop-down arrow and select Open.
The USB Adapter automatically selects WEP as the Encryption
Mode.
3
In the Preconfigured key [WEP] area, do the following:
a
b
c
d
e
In the Format for entering key list, select
• ASCII characters if your network uses all Zoom
wireless products
• Hexadecimal digits if an access point, router, or some
adapters are not Zoom products
In the Key Length drop-down list, select 64 bits.
In the Key Index drop-down list, select which of four keys
– 1, 2, 3, or 4 – will be used to encrypt the data. The key
you select must be the same one that is selected on the
access point. We recommend that you use Key 1.
In the Network Key text box, enter a key.
• If you selected ASCII format, enter 5 characters. The
characters can be any upper- or lower-case letters and
numbers.
• If you selected Hexadecimal format, enter 10
characters. Each character can be any of the following:
0 1 2 3 4 5 6 7 8 9 A B C D E F
The network key must be the same for all the devices on
your network.
Re-enter the key in the Confirm Network Key text box.