Singing with vocal harmony, Changing the vocal harmony effect type, Setting the vocal harmony effect depth – Yamaha CVP-109 EN User Manual
Page 179
179
CVP-109/107/105/700
■
Changing the Vocal Harmony Effect Type
...............................
EFFECT TYPE
• Range: See table on page 219.
• Basic setting: KARAOKE1
When the Vocal Harmony function is on, the Clavinova applies an
effect to the lead and harmony vocal parts. This effect is separate from
the effects selected in the EFFECT 1 and EFFECT 2 displays (page 55).
You can select the type of effect that is applied using the
EFFECT TYPE
function in page 2 of the VOCAL HARMONY display.
Use the
EFFECT TYPE ▼ and ▲ buttons to select a different effect
type, or highlight the
EFFECT TYPE function and use the data dial or the
[–] and [+] buttons.
➔
The selected effect type is displayed.
To return the effect type to its basic setting (
KARAOKE1), press ei-
ther the
EFFECT TYPE ▼ and ▲ buttons or the [–] and [+] buttons si-
multaneously.
■
Setting the Vocal Harmony Effect Depth
..................................
EFFECT
• Range: 0 (no effect) — 127 (max.)
• Basic setting: 50
The
EFFECT function in page 2 of the VOCAL HARMONY display
lets you set the depth of the effect selected by the
EFFECT TYPE func-
tion in the same display page. To adjust the effect depth, select the
EF-
FECT function, then use the data dial or the [–] and [+] keys to change
the value.
➔
The
EFFECT
value changes.
You can also advance the value by holding down the
EFFECT button.
To reset the value to its basic setting of
50, simultaneously press the [–]
and [+] buttons.
177
When Vocal Harmony Is Off…
The selected effect is also applied to the
microphone signal when the Vocal Har-
mony function is turned off.
The [EFFECT] button setting does not
affect the effect that is applied to vocals.
To turn this effect off, set the effect depth
to 0.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Singing with Vocal Harmony
(CVP-109/107/700)