Song playback – Yamaha CVP-109 EN User Manual
Page 118
118
CVP-109/107/105/700
X Select the desired track for playback (PLAY/OFF, SOLO).
Select the track by using the
TRACK < and >buttons, the data dial,
or the [–] and [+] buttons.
➔
The selected track is indicated by an underline mark.
Turn playback on or off for the selected track by pressing the
rightmost LCD button to select
PLAY (playback) or OFF.
When a track is muted, the track number is “ghosted” and the sur-
rounding box diappears. The voice used by the currently selected
track is shown above
PLAY/OFF.
Select a track, then press and highlight the
SOLO LCD button to hear
only the selected track. Press the
SOLO LCD button again to cancel
the Solo function.
Assignment of Tracks to
1/RIGHT
1/RIGHT
1/RIGHT
1/RIGHT
1/RIGHT and 2/LEFT
2/LEFT
2/LEFT
2/LEFT
2/LEFT, and Voice Assignment
■
Assigning Tracks to
1/RIGHT
1/RIGHT
1/RIGHT
1/RIGHT
1/RIGHT
and
2/LEFT
2/LEFT
2/LEFT
2/LEFT
2/LEFT
.............................
Specific tracks can be assigned to the
1/RIGHT and 2/LEFT func-
tions in the SONG PLAY [MAIN] display, allowing you to selectively
turn playback of assigned tracks on or off.
TRK - - (OFF) can be as-
signed to
2/LEFT. The same track cannot be assigned to both parts.
1/RIGHT
• Settings: 1 — 16
• Basic setting: Depends on file type.
2/LEFT
• Settings: 1 — 16, -- (off)
• Basic setting: Depends on file type.
Select the SONG PLAY [L&R VOICE] display (display page 6) by
using the PAGE [<] and [>] buttons.
➾
Press the
1/RIGHT
button or the
2/LEFT
button to highlight the
corresponding function in the display, then use the data dial or [–]
and [+] buttons to assign the desired track.
You can also select the track by pressing the
1/RIGHT or 2/LEFT
button.
Tracks can only be assigned when play-
back is stopped at the top of the song.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Song Playback
116
The track assignments of DOC files and
Yamaha Disklavier PianoSoft files are
fixed, and therefore cannot be changed.