When the oven is first installed, Before first use – Zanussi ZOB 1060 User Manual

Page 6

To set the correct time of day :

a) press button

and, while the symbol is flashing

(Fig. 1), set the correct time of day by pressing
buttons “

“ or “ “ (Fig. 2).

The time arrow symbol will disappear about 5
seconds after the correct time is displayed (Fig. 3).
b) if the symbol is not flashing anymore, press

button

twice.

Then, proceed as described in point a).

Before first use

The oven should be heated without food.
To do that, proceed as follows:
— press button

to switch on the oven.

— press button

twice and select the

"Conventional Cooking" function

(Fig. 4).

— set the temperature to 250 °C using the increasing

push button “ “.

— Allow the oven to run

empty

for approximately 45

minutes.

— open a window for ventilation.
This procedure should be repeated with the "Fan

Cooking"

and "Full Grill"

function for

approximately 5-10 minutes.

During this time, an unpleasant odour may be
emitted. This is absolutely

normal

, and is

caused by residues of manufacturing.
Once this operation is carried out, let the oven
cool down, then clean the oven cavity with a
soft cloth soaked in warm water to which a little
mild washing-up liquid has been added.
Before cooking for the first time, carefully wash
the

shelves

and the

baking tray.

To open the oven door, always hold the
handle in the centre (Fig. 5).

Remove all packaging, both inside and outside
the oven, before using the oven.

When the oven is first connected to the electrical supply,

wait for 12:00 and the symbol

will flash on the

display.
Ensure the correct time of day is set before using the
oven.

When the oven is first installed

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5