Zanussi ZOB 1060 - Manual (Page 21)

2 1
Something not working
SYMPTOM
n The oven does not come on.
n The oven light does not come on.
n It takes too long to finish the dishes, or they are
cooked too fast.
n Steam and condensation settle on the food and the
oven cavity.
n The timer does not work.
n The oven fan is noisy.
n Error code "F xx" appears on the control panel.
SOLUTION
u Press the OVEN ON button, then select a cooking
function.
u Check the fuse and ensure the socket switch or the
switch from the mains supply to the oven are ON.
u Switch on the oven using push button 1.
u Check the light bulb, and replace it if necessary (see
"Replacing the Oven Light")
u The temperature may need adjusting
u Refer to the cooking function sections and to any
cooking chart provided
u Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
u Check the instructions for the timer.
u Check that shelves and bakeware are not vibrating in
contact with the oven back panel.
u Take note of the error code and contact an authorised
Service Centre.
If the oven is not working correctly, please carry out the following checks, before contacting your local Zanussi Service
Force Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation,
a charge will be made even if the appliance is under guarantee.