Zanussi Tuttopizza PDG933 - Manual

ZANUSSI
P R O F E S S I O N A L
DIGITAL GAS PIZZA OVENS
TUTTOPIZZA
291609
Supply voltage 230 V, 1N, 50 230 V, 1N, 50 230 V, 1N, 50
Net weight - kg. 155 217 291
gas 14 20 24
Power - kW
height 150 150 150
depth 670 1000 1000
width 670 670 1000
Internal dimensions - mm
height 500 500 505
depth/with open doors 970 1300 1320
depth 970 1300 1320
width 1060 1060 1390
External dimensions - mm
Diameter / cm 33 33 33
PDG143
291609
PDG163
291610
PDG193
291611
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The 3 models of gas ovens designed by
Zanussi Professional are digitally-controlled
and are sized for holding pizzas with a
diameter of 33 cm. All the models have a
single chamber with the possibility to be
easily stacked, thus increasing productivity of
the oven with the same overall size. The
stack execution requires special bases.
TECHNICAL
FEATURES
OVEN UNIT
� Cooking chamber constructed in stainless
steel. Cooking surface made of cordierite
refractory material (30 mm thick), which allow
backing directly on the surface as well as in
trays.
� Vapor and gas release vent.
� Heat recovery system, which ensures a
high level of cooking uniformity by limiting the
heating waste during the baking cycle and
allows a quick heating recovery after the
loading operation.
� Special 12 cm-thick rock wool insulation,
which guarantees minimal energy
consumption and reduction of heat
dispersion from the oven thus limiting rise in
temperature of the working environment.
� The special construction assures
maximum baking uniformity. This allows to
obtain a better quality pizza, eliminating the
user's need for rotating the pizza, and
consequently reducing the working times.
� Heat-proof internal lighting protected by a
stock-resistant covering, easy to remove for
replacement.
� Large-sized door in 430 AISI stainless
steel, fitted with a highly resistant borosilicate
glass front to increase visibility.
� The oven is digitally -controlled. The
temperature is regulated through a digital
thermostat.
� Burners safety device that automatically
turns off the gas in case of malfunction, with
emergency manual re-start switch.
� Control panel completely separate from
the cooking chamber, in order to ensure the
correct functionality of the electric
components and to ease any maintenance
operations.
� All models comply with the standards
required by the main international approval
bodies and areH-marked.
STANDS (available on request)
� All models can be mounted on stands,
constructed in 15/10 grey painted steel,
provided with an open base.