Safety and energy saving functions, Safety cut-off function, Residual heat function – Zanussi ZOB 1060 User Manual

Page 11: Child safety function

1 1

Safety and Energy Saving Functions

To Programme the Oven to Switch
On and Off

1) Carry out the "Cooking Duration" setting as described

in the relevant chapter.

2) Press button

until the "End of Cooking" function

is selected and the relevant symbol flashes. The

control panel will display the end of cooking time (that
is, the actual time + cooking duration time - Fig. 14).

3) Press button “ “ to select the required end of cooking

time.

4) After this is set, the programmer will wait 3 seconds

and then start running.

5) The oven will switch on and off automatically. The

end of cooking will be marked by an acoustic alarm.

6) To switch off the acoustic alarm, press any (

button

switch off the oven).

To cancel the programme, simply cancel the
Duration Time.

Fig. 14

Safety Cut-Off Function

The oven will switch off automatically if any change of
setting is made, according to the table below (Fig. 15).

If temperature setting is:

the oven will switch off:

250°C

after 3 hours

from 200 up to 245°C

after 5,5 hours

from 120 up to 195°C

after 8,5 hours

less than 120°C

after 12

hours

Fig. 15

Residual Heat Function

When a Cooking Duration time is set, the oven will
automatically switch off a few minutes before the end of the
programmed time, and use the residual heat to finish your
dishes without energy consumption. All current settings
will be displayed until the Cooking Duration time is over.
This function will not operate when the Cooking Duration
time is less than 15 minutes.

Child Safety Function

To avoid children switching on the oven, it is possible to
lock the oven controls.
1) Turn off the oven by pressing button

(this function

is available only when oven is off).

2) Press buttons

and “ “ at the same time and

keep them pressed for about 3 seconds. An acoustic
signal will be emitted and the indication ‘SAFE’ will
appear on the display (Fig. 16).

3) The oven is now locked. Neither oven functions nor

temperatures can be selected.

To unlock the oven:

Press buttons

and “ “ at the same time and keep

them pressed for about 3 seconds. An acoustic signal will
be emitted and the indication ‘SAFE’ will go off. The oven
can now be operated (Fig. 17).

Fig. 16

Fig. 17