ZyXEL Communications NSA-220 - Manual (Page 87)

Chapter 7 Network Screen
NSA-220 User’s Guide
87
Figure 64 System Setting > Network > TCP/IP
The following table describes the labels in this screen.
Table 23 System Setting > Network > TCP/IP
LABEL DESCRIPTION
IP Address
Dynamic Select this option to have the NSA get IP address information automatically.
If no IP address information is assigned, the NSA uses Auto-IP to assign itself an
IP address and subnet mask. For example, you could connect the NSA directly to
your computer. If the computer is also set to get an IP address automatically, the
computer and the NSA will choose addresses for themselves and be able to
communicate.
Static Select this option for the NSA to use fixed TCP/IP information. You must fill in the
following fields.
IP Address Type an IP address in this field.
IP Subnet
Mask Type an IP subnet mask in this field.
Default
Gateway Type a default gateway address in this field.
DNS DNS (Domain Name System) is for mapping a domain name to its corresponding
IP address and vice versa. If you have the IP address(es) of the DNS server(s),
enter them.
Dynamic Select the option to have the NSA get a DNS server address automatically.
Static Select this option to choose a static DNS server address. Type the DNS server IP
address(es) into the fields below.
Primary DNS
Server Type a primary DNS server IP address.