Xerox EX7750 - Manual (Page 19)

11 Preparing to print
Downloading EX7750 firmware
New firmware is downloaded to the printer the first time you connect the EX7750 to
the printer and power on the system.
T O DOWNLOAD EX7750 FIRMWARE
1. Power on the EX7750 using the power switch.
2. Power on the printer.
N OTE : The first time you power on, the EX7750 automatically downloads firmware to
the printer. The following occurs, in this order:
• In approximately two minutes the EX7750 automatically begins to download
firmware to the printer. The message “PROCESSING DATA-PLEASE WAIT”
displays on the printer front panel.
• The printer prints a Caution page and displays the message “Caution! Downloading
ROM. This takes several minutes. DO NOT INTERRUPT!” Do not interact with
the EX7750 or the printer during this time.
• Download progress displays: “Download 50%. DO NOT INTERRUPT!”
• The message displays “Firmware upgrade completed. Printer will reboot in 5
seconds!” The printer reboots. An EX7750 test page prints automatically.
Changing the language on the EX7750
If a language other than English is required on the EX7750, you must reinstall system
software using the desired language System Software CDs provided in the media pack.
For more information, see the
Configuration Guide .