Desktop and portable computers – Xerox DocuColor 7002 User Manual
Page 7

www.xerox.com/Section508
7 of 10
Last Revision: 04/15/06
Criteria
Supporting Features
Remarks and explanations
minimum above the floor.
(j)(3) Products which are
freestanding, non-portable,
and intended to be used in
one location and which
have operable controls shall
comply with the following:
Where any operable control
is more than 10 inches and
not more than 24 inches
behind the reference plane,
the height shall be 46
inches maximum and 15
inches minimum above the
floor.
Supports
All operable controls are within specification.
(j)(4) Products which are
freestanding, non-portable,
and intended to be used in
one location and which
have operable controls shall
comply with the following:
Operable controls shall not
be more than 24 inches
behind the reference plane.
Supports
All operable controls are within specification.
Section 1194.26 Desktop and Portable Computers – Detail
Criteria
Supporting Features
Remarks and explanations
(a) All mechanically
operated controls and keys
shall comply with §1194.23
(k) (1) through (4).
Supports
Mechanically operated controls and keys comply with 1194.23
(k)(1) – (k)(4).
(b) If a product utilizes
touchscreens or touch-
operated controls, an input
method shall be provided
that complies with
§1194.23 (k) (1) through
(4).
Not applicable
No touch screen or contact sensitive controls are included on
the DFE.
(c) When biometric forms of
user identification or control
are used, an alternative
form of identification or
activation, which does not
require the user to possess
particular biological
characteristics, shall also be
provided.
Not applicable
Biometric forms are not used.
(d) Where provided, at least
one of each type of
expansion slots, ports and
connectors shall comply
with publicly available
industry standards
Supports
Expansion slots, ports, and connectors comply with publicly
available industry standards.