ZyXEL Communications P-2302R-P1 Series - Manual (Page 8)

P-2302R-P1 Series Quick Start Guide
8
3.3 VoIP Setup Wizard
Note: You must have Internet access and a VoIP account before you can complete this section.
3.4 Bandwidth Management Wizard (Optional)
If you want to use the Bandwidth Management Wizard, please see the User’s Guide for instructions.
1 In the Wizard Setup screen, click VoIP Setup. 2 Enter the information provided by your VoIP
service provider. If you have a VoIP account like
[email protected], the SIP Number is
1234, and the SIP Service Domain is VoIP-
provider.com. Use the default values if your VoIP
service provider did not provide the requested
information.
Select Check here to set up SIP2 settings if you
want to set up the second VoIP account in the P-
2302R-P1 now. In this case, enter the information for
the first VoIP account, click Apply, and enter the
information for the second VoIP account. You can
also set up the second account later. See the User’s
Guide for instructions.
Click Apply.
3 Wait while the P-2302R-P1 tries to register the
VoIP account(s).
4 Click Finish. The PHONE light should be green.