ZyXEL Communications P-2302R-P1 Series - Manual (Page 5)

P-2302R-P1 Series Quick Start Guide
5
3.2 Connection Wizard
If you subscribe to a Roadrunner service, you cannot use the Connection Wizard to set up your Internet
connection. In this case, please see the User’s Guide for instructions.
Note: You must have Internet access before you can complete this section.
1 In the Wizard Setup screen, click Connection
Wizard.
2 Click Next.
3 System Name is used to identify the P-2302R-P1
in the network. Use the default value, unless you
know the name is already used in the network.
Domain Name (optional): Enter the appropriate
name, if there is one, or use the default value.
Click Next.
4 This screen has different fields, depending on the
connection type (encapsulation) your ISP uses.
Select Ethernet or PPP over Ethernet (PPPoE). If
you are not sure and if your ISP gave you a user
name and password, select PPP over Ethernet.
Then, follow the instructions in the appropriate
section below.