Xantrex Technology GT 2.5-DE - Manual (Page 60)

Monitoring the Inverter
5–6 975-0253-01-01
Offline messages
for all systems Additional message screens can be viewed when the system is offline by tapping
the Xantrex logo near the LCD. Each additional tap displays the next screen, in
the order shown in Table 5-6.
These message screens are common to all GT Inverter systems, no matter how
many units are installed. If you continue to tap the unit, then the LCD will
continue to cycle through all of the available offline mode screens.
Additional Offline
messages for
multiple unit
systems Multiple unit systems in offline mode display all of the message screens shown in
Table 5-6, plus the additional screens shown in Table 5-7. These additional
screens are displayed following the “Time Online” screen.
These screens are only displayed when multiple GT Inverters are connected by
network cables. If you continue to tap the unit, then the LCD continues to cycle
through all of the available offline mode screens.
Table 5-6 Offline Mode Screens for All GT Inverters
Tap Display*
* In a multiple unit system with network cables properly installed, the system
values displayed are for the entire system. Time online is for the local inverter.
Description
1st time Inverter
Offline
LCD back light turns on for better readability
and default Offline Mode screen is displayed.
2nd time System 0W
Today 2.50kWh
Power being produced by the system now.
Cumulative energy produced by the system
today.
3rd time System Lifetime
305kWh
Lifetime energy produced by the system.
4th time Time Online
hh:mm:ss
Total time that the system was online today, in
hours (hh), minutes (mm) and seconds (ss).
Table 5-7 Additional Offline Mode Screens for Each GT Inverter in a Multiple
Unit System
Tap Display Description
5th time Unit 0W
Today 1.25kWh
Power being produced by this unit now.
Cumulative energy produced by this unit today.
6th time Unit Lifetime
150kWh
Lifetime energy produced by this unit.