Tools and materials needed, Dimensions, Tools and materials needed –11 dimensions –11 – Xantrex Technology GT 2.5-DE User Manual
Page 31: Figure 2-4
Mounting the Inverter
975-0253-01-01
2–11
This chapter describes the first step: mounting the inverter and installing
accessories.
Mounting steps
Instructions for mounting the GT Inverter are described in the following sections:
•
“Installing the Mounting Bracket” on page 2–12
•
“Mounting the Inverter on the Bracket” on page 2–16.
Tools and Materials Needed
•
Assorted screwdrivers, drill, etc.
•
Level
•
Mounting support material, such as plywood or poles
•
Wood screws, anchors for screws, depending on mounting surface.
Dimensions
The dimensions of the inverter are shown in Figure 2-4.
Figure 2-4 GT Inverter Dimensions
40.3 cm
15.9"
55.1 cm
21.7"
52.1 cm
20.5"
59.7 cm
23.5"
10.2 cm
4"
14.6 cm
5.7"
Flange and
Mounting Slots
Communication
ports cover