Xantrex Technology GT 2.5-DE - Manual (Page 46)

Wiring the Inverter
3–10 975-0253-01-01
Cabling Requirements
The network uses Category 5 (CAT 5) cable, a standard cable available from any
computer supply store. The cable consists of eight conductors in four twisted pairs
with an RJ45 modular connector wired to the T568A standard. Table 3-1 contains
the arrangements of wire colors to pin numbers for the T568A standard.
RJ45 Connector Requirements
The network cable uses modular RJ45 connectors, as shown in Figure 3-9. The
connector is suitable for cost-sensitive applications and is easily installed. The
RJ45 connector should be a modular plug, 8-position, 8-contact for round,
stranded, unshielded cable.
CAUTION: Equipment damage
Do not use crossover cable in a Xanbus system.
Table 3-1 T568A Standard Wiring
Pin Number Conductor Name CAT 5 Cable Insulation Color
1 NET_S White/Green
2 NET_S Green
3 NET_C White/Orange
4 CAN_L Blue
5 CAN_H White/Blue
6 NET_C Orange
7 NET_S White/Brown
8 NET_C Brown
Figure 3-9 RJ45 Connector