Zanussi ZU 7115 - Manual (Page 4)

4
DESCRIPTION OF THE APPLIANCE
OPERATION
➀
Dairy compartment
➁
Can storage shelf with egg tray
➂
Bottle storage shelf
➃
Salad drawers
➄
Glass shelf (for storing fresh meat)
➅
Storage shelves
➆
Thermostat control
➀
➁
➂
➃
➄
➅
➆
Before use
Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water). Do not use soap or
detergent as the smell may linger. Dry thoroughly.
Setting the temperature
The temperature inside the refrigerator is regulated
by a thermostat with 6 temperature positions and one
«OFF» (O) position.
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat dial to the required position.
An intermediate position is usually the most suitable,
although the temperature will be affected by:
l Room temperature
l How often the door is opened
l How much food is stored
l Position of the appliance
In determining the correct temperature control setting
all these factors have to be considered and some
experimentation may be necessary.
When altering the temperature setting, allow 24
hours for the temperature to stablise before making
further changes.
Important
If the fridge is not defrosting correctly, it is
possible that because a very low
temperature has been selected, the motor
is working continuously, which prevents
the defrost cycle from operating.
To ensure correct defrosting, a lower
number should be selected on the
thermostat and you should notice that the
motor cuts out from time to time, which is
correct.
If you wish to return to a lower temperature,
turn the thermostat to a higher number,
however you should turn the setting lower
occasionally to allow automatic defrosting.