Zanussi ZCM ID - Manual (Page 41)

Problem
The oven fan is noisy
Check
l
Check that the cooker is properly installed and is level.
l
Check that shelves and bakeware are not vibrating in contact with
the back panel in the oven.
Problem
The oven does not work
Check
l
Check that the clock is set for manual cooking. See page 26.
l
Check that the cooker has been plugged in and switched on at the
wall.
l
Check that you have correctly followed the instructions for using the
oven. See pages 5 and 6.
l
Check that there is not a fault with the electrical supply. If the cooker
will not work because there is an electrical power failure such as a
power cut, you can not use the main oven.
Problem
Having difficulty cleaning any part of the cooker.
Check
l
Check that the instructions for care and cleaning, beginning on page
30 are being followed.
Problem
The oven light will not work.
Check
l
If the light does not work you probably need to replace the bulb. To
do this see instructions on page 39.
l
Check there is not a fault with the electrical supply.
l
First, check the socket by trying out another electrical appliance in it,
if that works renew the fuse in the plug. Use a 13 amp fuse. If the
fuse 'blows' again this indicates that there is a fault on the cooker. Do
not use a fuse with a higher rating than 13 amps. Do not carry out
further electrical work. Unplug the cooker and inform your installer.
IMPORTANT: If you call out an engineer to rectify a fault listed here, or
to repair a fault caused by incorrect use or installation a charge will be
made, even if the appliance is in guarantee.
41
Z C M I D
What is wrong and why?