Zanussi ZCM ID - Manual (Page 37)

Positioning
The diagram shows how close to the cooker cupboards, shelves,
curtains and so on can be fitted. Look at the diagram and carefully read
the instructions to make sure your cooker is fitted safely. If you are in
doubt your installer will give you advice.
l
This is a type X cooker which means it is free-standing and can be
fitted with cabinets on one or both sides.
l
Do not fit any materials which may catch fire, for example wood or
curtains behind the cooker.
l
Base units which are higher than the hotplate must be 100mm away.
l
If a cooker hood is fitted check the cooker hood installation
instructions.
l
We recommend that cabinets fitted next to or above the cooker meet
British Standards. Your installer will give you advice if you are not
sure.
Cooker dimensions
Height to hotplate: 898mm - 920mm
(adjusted by two screw feet )
Width: 598mm
Depth: 600mm (to front of door panel)
37
Z C M I D
Installation