Yamaha CDR-HD1500HDD - Manual (Page 51)

45
English
CD-R/CD-R
W COPYING
4
DUPLICATING A CD
This unit equips the Duplicate feature that enables to create a copy CD easily and quickly.
Note
Duplication may not correctly made on a CD-R or CD-RW disc that does not support high speed writing. In this case, copy a CD onto the
HDD first, then perform “Digital Move” on a CD-R or CD-RW disc at 4x speed.
HDD/CD RECORDER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
CDR HDD
w /d COPY
ENTER
COMPLETE
TRACK NO.
WRITE
HDD
CDR
GROUP SKIP
CLEAR
OPEN/CLOSE
COPY
FINALIZE
REPEAT
1
A B C
2
D E F
3
G H I
4
J K L
5
M N O
6
P Q R
7
S T U
0
SPACE
MODE MENU
8
V W X
10
SYMBOL BOOKMARK
9
Y Z
A. M. Q. R.
ERASE
RANDOM
TIMER REC
INTRO
REC
INPUT
TEXT/TIME
COPY
W /D
1.
Set the original CD in the disc tray.
This unit starts reading the information (type and capacity of a
CD) when a CD is loaded.
The following message appears during reading (the process
may take 10 to 20 seconds depending on the disc condition).
When reading the information has been completed, the display
changes as follows, and this unit becomes ready for operation.
2.
Press COPY three times.
The following message appears on the display, and this unit
enters the duplicate standby mode. Duplication has not been
started yet at this stage.
DIG
REC
L
R dB –30 –10 –6 –2 0 ALL SYNC
DUPLCT
D u p l i c a t e
TOC
CD
DIG
REC
L
R
dB –30 –10 –6 –2 0 ALL SYNC
DUPLCT
1 π 1 0 0 0
TOC
CD
L
R dB –30 –10 –6 –2 0
R e a d i n g
1 4 6 8 1 7
TOC GROUP
CD
L
R dB –30 –10 –6 –2 0
1
TOC GROUP
CD
L
R
dB –30 –10 –6 –2 0
Total number of tracks Total time
3.
Press w/d to start copying from the CD onto the HDD.
The copying conditions are as follows:
• Copy Method: “Digital Copy”
• Copy Level: 0dB
• Copy Speed: “Best Effort”
Notes
• If copying is canceled by a being pressed, even the data that
has been copied before cancellation does not remain on the
HDD.
• If a track is copy protected by the SCMS standard (P.82), that
track cannot be copied onto the HDD.
When copying from the CD onto the HDD has been
completed, the following message appears on the
display.
4.
Set a new CD-R or CD-RW disc in the disc tray.
The unit starts to read the disc information, then starts copying
track data from the HDD to a CD-R or CD-RW disc.
C h a n g e D i s c s !
DIG
REC
TOC
CD
L
R dB –30 –10 –6 –2 0 ALL SYNC
DUPLCT
104_HD1500(E)38-49.p65 3/22/05, 14:49 45