Yamaha CDR-HD1500HDD - Manual (Page 20)

14
TURNING ON/OFF THE UNIT
This unit equips the HDD and CDR drive. When operating the unit, you need to select HDD or CDR drive in accordance with your purpose.
SELECTING THE OPERATIONAL DRIVE (HDD/CDR)
To operate the HDD drive, press HDD.
The HDD mark lights in the display, and the disc information
appears.
To operate the CDR drive, press CDR.
The unit starts to read the information of a disc set in the disc tray.
When the disc information is read completely, the CDR mark lights
in the display, and the disc information appears.
When no disc is set in the disc tray, the message “No Disc” appears.
Memo
If you set a disc in the disc tray, the unit automatically switches to
the CDR drive operation mode.
NATURAL SOUND HDD/CD RECORDER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
CDR HDD
MIN MAX
LEVEL PHONES
POWER
POWER
NATURAL SOUND HDD/CD RECORDER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
CDR HDD
MIN MAX
LEVEL PHONES
POWER
CDR HDD
MODE
ENTER
MENU
COMPLETE
TRACK NO.
WRITE
HDD
CDR
GROUP SKIP
CLEAR
HDD
CDR
Notes
• Do not turn off the unit during playback or recording. Doing so
may damage the HDD or data.
• If the message “Wait” appears in the display for 20 seconds or
more after turning on the unit, the HDD may not be installed
properly. Refer to the “HDD Installation Manual” and check the
connection.
Press POWER on the front panel.
When the unit turns on, the message “WELCOME TO YAMAHA
HDD/CD SYSTEM” appears on the front panel display, then the
unit becomes ready to be operated.
For information on specifications such as power consumption, refer
to “SPECIFICATIONS” (P.83).
102_HD1500(E)12-25.p65 3/20/05, 12:39 14