Yamaha DIGITAL SOUND PROJECTOR HTY-750 - Manual (Page 72)

Selecting the input mode
70
En
You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source. This function is available for TV/STB, DVD, and AUX.
y
We recommend setting the input mode to AUTO in most cases.
1
Set the operation mode selector to YSP.
2
Press one of the input selector buttons to
select the desired input source.
3
Press INPUTMODE repeatedly to toggle
between input modes.
ANALOG is not available as the input mode of DVD and
AUX.
• AUTO
Automatically selects audio input signals in the following
priority order:
1) Dolby Digital or DTS
2) PCM
3) Analog
y
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
y
You can adjust the default input mode to be selected when the
power of this unit is turned on by adjusting INPUT MODE in
INPUT MENU (see page 64).
Selecting the input mode
4 6
3 2 1
+10 0
7 8 9
5
STEREO MY BEAM
SLEEP INPUTMODE
CH LEVEL MENU
RETURN TEST
5BEAM ST+3BEAM 3BEAM
VOL MODE
AUTO
SETUP
MACRO
TV
INPUT2 INPUT1
YSP
TV/AV
STB
TV
VCR DVD AUX
TV AV
ENTER
SUR. DECODE
MY SUR.
YSP
TV/AV
AUX DVD VCR STB
TV
Note
TV/STB AUTO
TV/STB DTS
TV/STB ANALOG
DVD AUTO
DVD DTS
INPUTMODE
When TV or STB is selected
as the input source
When DVD is selected
as the input source
AUX AUTO
AUX DTS
When AUX is selected as
the input source