Yamaha DIGITAL SOUND PROJECTOR HTY-750 - Manual (Page 65)

63
En
MANUAL SETUP
AD
V
ANC
ED
OPERA
T
ION
English
■ AUDIO DELAY (Audio delay)
Use to delay the sound output and synchronize it with the
video image. This may be necessary when using certain
LCD monitors or projectors.
Choices: 0 to 160 msec
■ DD/DTS Dynamic Range
(Dynamic range of Dolby Digital and
DTS signals)
Use to select the amount of dynamic range compression.
This setting is effective only when the unit is decoding
Dolby Digital and DTS signals. Dynamic range is the
difference between the smallest sound that can be heard
above the noise of the equipment and the biggest sound
that can be heard without distortion.
Choices: MIN (minimum), STD (standard),
MAX (maximum)
Select to adjust the dynamic range compression.
• Select MIN for listening to sources at low volume
levels.
• Select STD for general use.
• Select MAX for feature films.
■ TruBass
Use to turn on or off the bass sound enhancer. The SRS
TruBass technology improves bass even without a
subwoofer and provides deeper, richer bass in the presence
of a subwoofer.
Choices: OFF, ON
TruBass is not available when My Beam (see page 51) or My
Surround (see page 45) is selected as the beam mode.
AUDIO DELAY ;;;;;0msec
[ ]/[ ]:Select
[ENTER]:Return
p p
D)AUDIO DELAY
MIN STD MAX
[ ]/[ ]:Select
[ENTER]:Return
p p
E)DD/DTS Dynamic Range
p
Note
OFF ON
[ ]/[ ]:Select
[ENTER]:Return
p p
F)TruBass
p