Playing back sound clearly (my beam), Using auto-adjust function, Set the operation mode selector to ysp – Yamaha DIGITAL SOUND PROJECTOR HTY-750 User Manual

Page 53

PLAYING BACK SOUND CLEARLY (MY BEAM)

ERA

English

You can improve listenability in a noisy environment by changing the beam mode to My Beam, which outputs sound
beams directly toward the listening position in a single channel. In addition, My Beam is also ideal when you do not want
the sound beams to be reflected on the walls in your listening room or when you do not want to disturb other people
while enjoying music or movies at night.

If My Beam is selected as the beam mode, the surround modes (see page 46) and TruBass (see page 63) become ineffective. In addition,
no audio is output from the subwoofer connected to this unit.

The My Beam microphone on the remote control collects
the test tones from this unit so that the beam angle can be
automatically adjusted.

Set the operation mode selector to YSP.

Press and hold MY BEAM for more than two
seconds.
A test tone is output twice from this unit. Keep
pointing the remote control toward this unit while the
test tones are being output so that the My Beam
microphone can collect the test tones.
Control range: L50° to R50°
Operation guarantee range: 6 m (20 ft), L30° to R30°

• If an error occurs, an error buzzer is played and “MY BEAM

ERROR” is displayed in the front panel display.

• An error may occur if the listening room is noisy. Make sure

that the listening room is as quiet as possible while the test
tones are being output.

• Do not shake or move the remote control while the test tones are

being output.

• Do not cover the My Beam microphone on the remote control

while the test tones are being output.

• The batteries in the remote control may be weak if the remote

control does not function properly. In this case, replace all the
batteries and then try the procedure again.

• When the input signal with 64 kHz, 88.2kHz, or 96 kHz of

sampling frequency is being played back, the beam angle
cannot be automatically adjusted.

Playing back sound clearly (My Beam)

Note

+10

STEREO

MY BEAM

SLEEP

CH LEVEL

MENU

RETURN

TEST

5BEAM

ST+3BEAM

3BEAM

YSP

TV/AV

POWER

STANDBY/ON

ENTER

SUR. DECODE

MY SUR.

My Beam
microphone

Using auto-adjust function

YSP

TV/AV

MY BEAM

Notes