Xantrex Technology RC/GS RC7 - Manual (Page 21)

Installing the RC/GS and RC7
975-0210-01-01 9
8. Wait for the screen to show the message “Waiting for
AC.”
9. Place the
ON
/
OFF
switch on the RV Series Inverter/
Charger to the ON position.
10. Reconnect the RV Series Inverter/Charger to the AC
source. After a brief delay, the remote will display a
system status message similar to Figure 2-4.
Important:
The remote will not operate the RV Series Inverter/
Charger if the
ON
/
OFF
switch is in the
OFF
position.
Figure 2-4 System Status Message
System Status:
AC Available
RC-GS_manual.book Page 9 Thursday, May 26, 2005 4:58 PM