Yamaha RXV2092 - Manual (Page 70)

66
Empty keys ( 1 , 2 )
These are empty keys. Each key can learn a function from
another remote control unit.
For example, the TV key is useful for storing the function of your
TV’s power switch, and the VCR key can be used for your VCR’s
power switch.
NOTE
If a key which has a preset function learns a new function, the
preset function will not be deleted, but disabled. When the learned
function is cleared, the preset function is restored. (For information
on clearing a learned function, refer to pages 76 to 77.)
About the marks shown on the remote control unit
The marks on the remote control unit signify functions of keys,
input sources, etc.
Examples)
(tape): Shows tape deck, VCR, etc.
(disc): Shows CD player, LD player, etc.
(radio wave): Shows tuner, TV/BS tuner, etc.
These marks are helpful for storing new functions.
Examples)
•
The area B of keys 1 is suitable for storing functions to control
your VCR.
• The area B of keys 3 is suitable for storing functions to control
your TV/BS tuner.
About the lighting of keys
When you press an input selector key, it lights up for about 3
seconds.
When an input selector key in the group of selected memory
area (A, B or C) is pressed, the mark of key group ( 1 – 3 ) which
is the same as the mark of the selected input selector key lights up
for about 3 seconds.
Example)
Conversely, when a key of group 1 – 3 is pressed, its mark
and the input selector key with the same mark in the group of the
selected memory area light up for about 3 seconds.
This feature may be helpful for you if you store functions for
controlling an input source to a group of keys whose mark lights up
when the corresponding input selector key is pressed.
TAPE
A/B REC/PAUSE
B A
A
TUNER
VCR 1
B
DIR
D SC STOP
TRANSMIT
/LEARN
LEARN CLEAR MACRO
CD
Red (This shows that the
memory area A is
selected.)
Lights up.