Adjusting delay time – Yamaha RXV2092 User Manual

Page 64

Adjusting delay time

You can adjust the time difference between the beginning of the

sound from the main speakers and the beginning of the effect
sound from the rear or front effect speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs individually.

NOTES
•

Adding too much delay will cause an unnatural effect with some
sources.

•

When the –/+ button is pressed, sound is momentarily
interrupted.

Adjusting output level of the front effect, center, right
rear and left rear speakers, and subwoofer

If desired, you can adjust the sound output level of the each

speaker even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on pages 41 to 42.

NOTES
•

Output level of the front effect speakers cannot be adjusted
when the program DOLBY PRO LOGIC (DOLBY DIGITAL) is
selected.

•

Output level of the center speaker cannot be adjusted when the
program STADIUM, DISCO, ROCK CONCERT, JAZZ CLUB,
CHURCH or CONCERT HALL is selected, and the input signal
is analog, PCM audio or encoded with the Dolby Digital (AC-3)
in 2-channels.

•

Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.

NOTE
The values of the delay time and each speaker level you set the
last time will remain memorized even when the power of this unit is
off.
However, if the power cord is kept disconnected for more than one
week, these values will be automatically changed back to the
original factory settings.

Program

1. DOLBY PRO LOGIC

DOLBY DIGITAL

2. PRO LOGIC ENHANCED

DOLBY DIGITAL ENHANCED

3. MOVIE THEATER

DIGITAL MOVIE THEATER

4. TV SPORTS

5. STADIUM

6. DISCO

7. ROCK CONCERT

8. JAZZ CLUB

9. CHURCH

10. CONCERT HALL

Control range (ms)

15 to 30

0 to 15

15 to 30

0 to 15

15 to 30

1 to 50

Speakers

FRONT

CENTER

RIGHT SURROUND

LEFT SURROUND

SUBWOOFER

Preset value

Control range (dB)

MIN, –20 to +10

MIN, –20 to 0