Yamaha RXV2092 - Manual (Page 68)

64
D EFFECT ON/OFF key
Switches on/off the digital sound field processor (including the
Dolby Pro Logic Surround Decoder or the Dolby Digital (AC-3)
Decoder).
E Input selector keys
Selects input source.
F A/B/C indicators
The position (A, B or C) selected by the A/B/C switch is shown in
red.
G A/B/C switch
This switch must be used only when the lid of the remote control
unit is open. (This switch will not function when the lid is closed.)
Normally, set this switch to the “A” position. When controlling a
Yamaha LD player by using the CD/LD player keys (
2 ), set this
switch to the “C” position.
H TRANSMIT/LEARN indicator
Lights up when the remote control unit is transmitting infrared
signals (when a command key is pressed).
I LIGHT key
If this key is pressed, some of the keys on the remote control unit
light up for about 5 seconds. If this key is pressed while those keys
are lighting up, they stop lighting.
NOTE
When using the keys to control Yamaha components, identify
them with your component’s keys. If these keys are identical,
their functions will be the same. For each key function, refer to
the corresponding instruction in your component’s manual.
LEARNING NEW CONTROL FUNCTIONS
(When the lid is open)
This is a learning remote control unit. The shaded keys in
the illustration shown right can be programmed to “learn” control
functions from other remote control units. By learning key-functions
from other remote control unit, this unit can then be used in place
of one or more other remote control units, thus making operation
of your various audio and video components more convenient.
Some of the “learning-capable” keys are originally empty and
others have already been preset with functions to control this unit
and other Yamaha components. You can store new functions to
them (in place of preset functions) as desired.
*
See pages 73 to 74 for the learning method.
* See pages 76 to 77 for clearing a learned function (or all
learned functions).
NOTE
If the memory capacity of the remote control unit becomes full, no
further learning is possible even if some learning-capable keys are
not occupied with new functions. If, for example, you store only
Yamaha codes into this remote control unit, up to about 50
functions can be stored. Store new functions to the learnable-
capable keys which are useful for you.