Yamaha RXV2092 - Manual (Page 65)

61
English
If you use the SLEEP timer of this unit, you can make this unit
turn off automatically. When you are going to sleep while enjoying
a broadcast or other desired input source, this timer function is
helpful.
NOTES
•
The SLEEP timer can be controlled only with the remote
control unit.
• The components on which the SLEEP timer is effective are the
sources connected to the SWITCHED AC OUTLET(S) on the
rear panel of this unit.
To set the SLEEP time
1. Press the SLEEP key.
Press once or more to select the desired SLEEP time.
Whenever the SLEEP key is pressed, the SLEEP time will
change as follows.
After a while, the display returns to the indication before the
SLEEP timer is set.
2. The unit will be turned off automatically at the selected SLEEP
time.
To cancel the selected SLEEP time
Press the SLEEP key once or more so that “SLEEP OFF”
appears on the display panel. (It will soon disappear and the
“SLEEP” indicator will go off from the display panel.)
NOTE
The SLEEP timer setting can also be canceled by turning off the
power with the POWER switch or disconnecting the power plug of
this unit from the AC outlet.
SETTING THE SLEEP TIMER
120 90 60 30
(Minutes)
The SLEEP timer is off (OFF).
(The state before the SLEEP
key is pressed.)
SLEEP
SLEEP
SLEEP
Indicates the SLEEP time.
Lights up.