Set menu – Yamaha RX-SL80 User Manual
Page 40
SET MENU
36
You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■
BASIC SETUP
Use to quickly setup basic system parameters (see page 16).
■
MANUAL SETUP
Use to manually adjust speaker and system parameters.
1 SOUND MENU
Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using LCD monitors or projectors.
y
Most of the parameters described in SOUND MENU are set automatically when you perform “BASIC SETUP” (see page 16). You can
use SOUND MENU to make further adjustmen
ts.
2 INPUT MENU
Use to reassign digital input and select the input mode.
3 OPTION MENU
Use to adjust the optional system parameters.
*a
: D)TUNER SET is only available for Asia and General models.
*b
: D)SCART SET is only available for U.K. and Europe models.
SET MENU
Item
Features
Page
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over
frequency.
38
B)SP LEVEL
Adjusts the output level of each speaker.
39
C)SP DISTANCE
Adjusts the delay time of each speaker.
40
D)CENTER GEQ
Adjusts the tonal quality of the center speaker.
40
E)LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
40
F)D. RANGE
Adjusts the dynamic range for Dolby Digital or DTS signals.
41
G)AUDIO SET
Customizes the muting level and audio delay.
41
Item
Features
Page
A)INPUT ASSIGN
Assigns jacks according to the component to be used.
41
B)INPUT MODE
Selects the initial input mode of the source.
42
Item
Features
Page
A)DISPLAY SET
Adjusts the brightness of the display and converts video signals.
42
B)MEMORY GUARD
Locks sound field program parameters and other SET MENU settings.
43
C)PARAM. INI
Initializes the parameters of a group of sound field programs.
43
D)TUNER SET
Switches frequency spacing.
*a
43
D)SCART SET
Turns on this unit when a component connected using a SCART cable is turned on.
*b
43