Yamaha RX-SL80 - Manual (Page 27)

23
TUNING
BA
S
IC
OPE
R
A
T
IO
N
■ Manual tuning
If the signal from the station you want to select is weak,
you must tune into it manually.
1
Press INPUT, then rotate VOLUME/SELECT
within 5 seconds to select TUNER.
If no operation is performed within 5 seconds of pressing INPUT
or VOLUME/SELECT is pressed on the front panel, the function
of VOLUME/SELECT switches back to volume level adjustment.
If this happens, “VOLUME” appears in the front panel display for
a few seconds.
2
Press INPUT repeatedly on the front panel to
select the reception band you want to tune.
“FM” or “AM” and the current frequency appear in
the front panel display.
3
Hold down TUNER (AUTO/MAN’L) for more
than 1 second until the “AUTO” indicator
disappears from the front panel display.
If “AUTO” is not shown in the front panel display,
you do not need to perform this step. In this case, skip
to step 4.
4
Press TUNER (AUTO/MAN’L), then rotate
VOLUME/SELECT within 5 seconds to tune
into the desired station manually.
Rotate rightward to tune to a higher frequency, or
rotate leftward to tune to a lower frequency.
• Manually tuning to FM stations will automatically change the
reception mode to monaural to increase the signal sensitivity.
• When tuned into a station, the “TUNED” indicator lights up and
the frequency of the received station is shown in the front panel
display.
Note
VOLUME/SELECT
INPUT
INPUT VCR
TUNED
AUTO
VOLUME
VIDEO 1 VIDEO 2 DTV/CBL TUNER DVD/CD
VCR
AUTO
VOLUME
VIDEO 1 VIDEO 2 DTV/CBL TUNER DVD/CD
VCR
AUTO
VOLUME
VIDEO 1 VIDEO 2 DTV/CBL TUNER DVD/CD
Notes
TUNER
AUTO/MAN'L
VCR
VOLUME
VIDEO 1 VIDEO 2 DTV/CBL TUNER DVD/CD
Disappears
TUNER
AUTO/MAN'L
VOLUME/SELECT