Using the harmony effect – Yamaha PLG100-VH User Manual
Page 10
10
Using the Harmony Effect
3)
At the “PLG100-VH” (Harmony) menu, press [ENTER] again.
4)
Assign the Insert Part parameter to the desired A/D Input.
Use the [SELECT
] button to select “Ins Part” (Insert Part), then use the
[VALUE /
] buttons to set the value to “AD01” (Input 1) as needed.
B Set the Harmony Type.
While still in the Harmony Edit menu, select the “Type” parameter (with the [SE-
LECT
] button), then use the [VALUE
/
] buttons to set the type: Vocoder,
Chordal, Detune, or Chromatic.
When set to Vocoder or Chordal, the notes or chords you play on the connected MIDI
keyboard determine the notes of the Harmony effect.
N Make other settings in the Harmony Edit menu as needed.
Select the desired parameter (with the [SELECT
/
] buttons), then use the [VALUE
/
] buttons to change the value.
Each Harmony Type has a different set of parameters. For a list of the parameters in
each type, see the following pages:
Vocoder ....................... page 13
Chordal ........................ page 19
Detune ......................... page 21
Chromatic .................... page 22
2)
Select the “PLG” menu. (Use the [SELECT
] button if necessary, and press
the [ENTER] button.)