beautypg.com

Using audio features, Enjoying high quality sound, Adjusting the tonal quality – Yamaha HTR-6140 User Manual

Page 45: Adjusting the speaker level, P. 41

background image

USING AUDIO FEATURES

41

En

English

BA

S

IC

OPERA

T

ION

Use the DIRECT mode to enjoy the high quality sounds of
the selected source. When the DIRECT mode is activated,
this unit plays back the selected source with the least
circuitry.

Press N

DIRECT (or press 5AMP and then

D

DIRECT) to select

DIRECT

.

• “TONE CONTROL” and “SOUND MENU” (see page 63)

settings (except for speaker level settings) are not effective.

• The front panel display automatically dims.

y

While DIRECT mode is activated, the front panel display turns on
momentarily when an operation is performed.

Use this feature to adjust the balance of bass and treble for
the front left and right speaker channels.

y

Speaker and headphone adjustments are stored independently.

1

Press K

TONE CONTROL repeatedly to

select the high-frequency response
(TREBLE) or the low-frequency response
(BASS).

2

Press L

PROGRAM l / h repeatedly to

adjust the high-frequency response
(TREBLE) or the low-frequency response
(BASS).

• If you increase or decrease the high-frequency or the

low-frequency sound to an extreme level, the tonal quality of
the surround speakers may not match.

• TONE CONTROL is not effective when this unit is in the

DIRECT mode, or when MULTI CH is selected as the input
source.

You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.

This operation will override the level adjustments made in
“AUTO SETUP” (see page 24) and “SP LEVEL” (see page 65).

1

Press 5

AMP and then press 7LEVEL on

the remote control and then 8k / n to select
the speaker you want to adjust.

y

• The available speaker channels differ depending on the

setting of the speakers.

• When the video monitor is turned on, the “SPEAKER

LEVEL” adjustment menu appears in the video monitor.

2

Press 8l / h to adjust the speaker output
level.

• Press 8h to increase the value.
• Press 8l to decrease the value.
• Control range: –10 dB to +10 dB

3

Press 7

LEVEL to turn off the speaker level

adjustment display.

Using audio features

Enjoying high quality sound

Notes

Adjusting the tonal quality

Notes

Adjusting the speaker level

Note

Display

Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SWFR

Subwoofer

SUR. L

Surround left speaker

SUR. R

Surround right speaker

01EN_HTR-6140_U.book Page 41 Friday, February 1, 2008 2:26 PM