Yamaha HTR-6140 User Manual

Page 27

Connections

English

PREP

ARA

TION

B CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound
field program (see page 39).

VIRTUAL indicator
Lights up when Virtual CINEMA DSP is active (see
page 39).

SILENT CINEMA indicator
Lights up when headphones are connected and a
sound field program is selected (see page 39).

C Multi-information display
Shows the name of the current sound field program and
other information when adjusting or changing settings.

D SLEEP indicator
Lights up while the sleep timer is on (see page 37).

E Input channel and speaker indicators

Input channel indicators

• Indicate the channel components of the current

digital input signal.

• Light up or flash according to the settings of the

speakers when this unit is in the automatic setup
procedure (see page 24) or the speaker level setting
procedure in the “SP LEVEL” (see page 65).

■ Using the remote control

The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.

1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.

To set the remote control codes for other components, see
page 75.

• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types

of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a heater or stove
– places of extremely low temperatures
– dusty places

Input channel indicators

LFE

L C R

LFE indicator

Notes

30º

Approximately

6 m (20 ft)

01EN_HTR-6140_U.book Page 23 Friday, February 1, 2008 2:26 PM