Yamaha HTR-6140 - Manual (Page 38)

34
En
Playback
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch between input
jacks when more than one input jack is assigned to as the
same input source.
y
• We recommend setting the audio input jack select to “AUTO”
in most cases.
• You can adjust the default audio input jack select of this unit by
using “AUDIO SELECT” in “OPTION MENU” (see page 71).
Press P
AUDIO SELECT (or press 5AMP and
then F
AUDIO SEL) repeatedly to select the
desired audio input jack select setting.
This feature is not available when no digital input jacks
(OPTICAL, COAXIAL and HDMI) are assigned. In addition,
HDMI is not available as an audio input jack select setting when
the HDMI IN DVD and HDMI IN DTV/CBL jacks are not used.
Use “INPUT ASSIGNMENT” in “INPUT MENU” to reassign
the respective input jack (see page 68).
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 18) as the input
source.
Press O
INPUT l / h repeatedly (or press
5 AMP and then EMULTI CH IN) to select
MULTI CH.
“MULTI CH” appears in the front panel display.
y
Use “MULTI CH SET” menu in “INPUT MENU” to set the
parameters for MULTI CH INPUT (see page 69).
The input signals are amplified and output directly without sound
processing. Therefore, you cannot activate sound field programs,
the night listening mode, etc. while MULTI CH is selected as the
input source.
Selecting audio input jacks
(AUDIO SELECT)
AUDIO SELECT Function
AUTO Automatically selects input signals in the
following order: (1) HDMI (2) Digital
signals (3) Analog signals
HDMI Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT Selects only digital signals. When no
signals are input, no sound is output.
ANALOG Selects only analog signals. If no analog
signals are input, no sound is output.
Note
MULTI CH DVR V-AUX DTV/CBL DVD CD MD/CD-R TUNER SIRIUS XM
A.SEL: AUTO
Currently selected audio input jack select setting
Available input sources
Selecting the MULTI CH INPUT
component
Note
01EN_HTR-6140_U.book Page 34 Friday, February 1, 2008 2:26 PM