ZyXEL Communications IES-5005 - Manual (Page 88)

IES-5000/5005/6000 Support Notes
87
2. CPE settings
evice to DSL port 25. Refer to the previous sections on how to
. IP Commander settings
creen and right-click on IP Commander and then click
Connect a CPE d
configure the CPE device.
3
Display the IP Commander s
Connect New Server”.
Enter the IP address (for example, 192.168.1.99) or domain name of the DHCP server
and click OK.
All contents copyright (c) 2008 ZyXEL Communications Corporation.